mod_grafik_1
close
Nola
Products
Four Seasons

Four Seasons In standard colour RAL1023.

Four Seasons with U10-00/TP - cover plates between braces and roof plate.

Four Seasons with U10-00/TP - cover plates between braces and roof plate.

Four Seasons pink RAL 3014, free-standing hexagonal concrete base

Four Seasons and LowBed in Västerås Skatepark. The weather protection is available in a number of additional RAL colours. Start-up cost will be added.

Four Seasons RAL 5018, free-standing hexagonal concrete base

Four Seasons can also be ordered with a straight pole.

Four Seasons RAL 6028, free-standing, hexagonal concrete base

Four Seasons

Sun Parasol

Design Thomas Bernstrand

The Four Seasons sun parasol is a sturdy year-round design that deflects the heat of the sun and provides shelter from the rain. Made from pieces of sheet steel circling around a steel post, the base bolts securely to the ground. The central support post can remain upright or be installed to tilt away from the base at an angle of up to 86°. Once the installation is complete, the support post will remain upright or permanently titled, as the angle cannot be adjusted afterwards. Four Seasons adds a contemporary element to city gardens, food courts and open courtyards, or any environment where shelter and shade are needed.

Climate footprint

278,63 kg CO₂

Certification

Save favourite
Print product sheet
Assembly instructions
Product overview
EPD
Open in BIM object
Download images
239 cm
255 cm
239 cm
207 cm
255 cm
207 cm

Dimensions and weight

Width: 238 cm
Height: 255 cm
Depth: 206,8 cm

Parasol: Weight: 100 kg
Concrete foot: Ø: 90 cm
Concrete foot: Height: 20 cm
Concrete foot: Weight: 270 kg

Individual dimensions
Diameter of the support post: Ø 60 cm
Angle of support post in angled version: up to 86°
Sunshade in 1,5 mm aluminum sheet
Stay and top cone in 5 mm sheet steel, foot plate in 10 mm sheet steel
Edging in extruded colored silicone

Product numbers and combinations

U10-00Four Seasons parasol, small base that bolts to the reinforced base, angled support post
U10-00/RAKFour Seasons small base that bolts to the reinforced base, straight support post
-
U10-00STOSFour Seasons galvanised steel reinforced base for casting in concrete, angled support post
U10-00STOS/RAKFour Seasons reinforced base for casting parasol in concrete, straight post
-
U10-00FSTOSFour Seasons galvanised steel reinforced base, bolts to the surface, angled support post
U10-00FSTOS/RAKFour Seasons galvanised steel reinforced base, bolts to the surface, straight post
-
U10-00/BFSFour Seasons six-sided concrete base
U10-00FSTOS/BFSFour Seasons galvanised steel reinforced base for six-sided base, for tilted post
U10-00FSTOS/RAK/BFSFour Seasons galvanised steel reinforced base for six-sided base, for straight support post
-
U10-00/TPFour Seasons, cover plate between brace and roof plate, 1 pc.
B11-06B11-06 Additional fee for choice of non-standard colour
B11-05Additional fee for choice of alternative silicon colour (as indicated by product codes ending with C)

Append to product number

Metal surface finish

GF for Yellow RAL 1023, fine powder paint
VF for White RAL 9010, fine powder paint
C for any color other than standard, starting cost is added.

Choosing non-standard colours for Four Seasons requires consideration as the parasol is coated with a fine structure powder paint that matches the colour of the silicon on the edges. Silicone is available in a number of corresponding RAL colours but may have to be specially mixed to match a non-standard colour.

The following RAL colours are available in silicone: RAL 1004, 1016, 1018, 1021, 1023, 1028, 2002, 2004, 3000, 3003, 3013, 3018, 3020, 3027, 4002, 4003, 4004, 4005, 4006, 5002, 5010, 5018, 5024, 6005, 6007, 6017, 6018, 6020, 6021, 6028, 6033, 6034, 7011, 7016, 7022, 7038, 7040, 8003, 8015, 9002, 9005, 9010, 9011, 9016.

Standard colours

RAL 1023
RAL 9010

Materials and surface treatments

The parasol is made in 1.5 mm aluminium sheet steel. The post and top-cap are made in 5 mm steel sheet and the base is made in 10 mm sheet steel. The protective flaps fitted along the parasol's edge are made in silicone. All steel parts are zinc-electroplated, chromed and powder-coated.

Aluminium

Aluminum is a soft light metal that is silvery to gray in color. Depending on the alloy, aluminum usually has good corrosion resistance. It is common for the aluminum to be extruded into tubes or rolled into a plate in the desired material thickness.

Steel

Nola uses high-quality steel with good strength in our products. Steel rusts if left untreated and must therefore be surface treated. 

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Concrete

Concrete is cement mixed with crushed stone or aggregate. The material is very strong in compression but fragile in tension. To compensate for this concrete can be reinforced, often with steel. 

Assembly and placement

Delivered in parts for assembly on site.

The base bolts to a concrete surface or can be cast in concrete beneath the ground. The central support post can remain upright or be installed to tilt away from the base at an angle of up to 86°. Once the installation is complete, the support post will remain upright or permanently titled, as the angle cannot be adjusted afterwards.

Maintenance

Powder coated Aluminium

Products that are powder-coated can be touch-up painted with alkyd paint if necessary.

Powdercoated steel

Products that are powder-coated can be touch-up painted with alkyd paint.

Concrete

Both normal concrete and fibre-reinforced concrete are sensitive to hard edge impacts. A concrete product that has been damaged can be repaired with polyester filler, such as the product “Plastic Padding”.

Read more in our general maintenance advice at nola.se/en/care-and-maintenance

Versions

The parasol is available in standard colour yellow RAL 1023 or White RAL 9010. Other colours are available for an additional fee. Please contact Nola to discuss the options available.

Character

This striking year-round parasol deflects the heat of the sun and provides shelter from wind and rain.

Sustainability

CO₂-eq: 278,63 kg CO₂
Energy consumption: 6782,20 MJ
Recycled materials: 0,30 %

View EPD for details

Four Seasons

Sun Parasol

Design Thomas Bernstrand

The Four Seasons sun parasol is a sturdy year-round design that deflects the heat of the sun and provides shelter from the rain. Made from pieces of sheet steel circling around a steel post, the base bolts securely to the ground. The central support post can remain upright or be installed to tilt away from the base at an angle of up to 86°. Once the installation is complete, the support post will remain upright or permanently titled, as the angle cannot be adjusted afterwards. Four Seasons adds a contemporary element to city gardens, food courts and open courtyards, or any environment where shelter and shade are needed.

Climate footprint

278,63 kg CO₂

Certification

Save favourite
Print product sheet
Assembly instructions
Product overview
EPD
Open in BIM object
Download images

Four Seasons has an angled pole as standard, but can also be ordered with a straight post. Here in Rosendal, Uppsala.

The Four Seasons sun and rain parasols designed by Thomas Bernstrand were installed in Rosendal park in Uppsala, Sweden. The parasols provides shelter and are a good placemaking tool that help strengthen the park’s identity.

The yellow parasols can also be seen on Torsgatan in Stockholm. Photo: Jann Lipka.

The urban beach Stenpiren in Gothenburg. Here you can see the two standard colours yellow and white.

The picture shows the Four Seasons in RAL 6021. The weather protection is available in a number of additional RAL colours. Start-up cost will be added.

Projects

Playa Stenpiren, Göteborg

A range of products from the Kajen furniture group were installed at Stenpiren, a city beach developed by the municipality of Gothenburg on Sweden’s west coast.

Löga Skatepark in Västerås

With a surface of 2,400 square metres, Västerås’ new skate park is one of the largest in Sweden. Built for skateboarding, inline skating, kick-biking and BMX-riding. The park was designed by Horn.Uggla.

Work OUT office Växjö

Working collaboratively with Castellum AB (a Swedish developer formerly known as Norrporten AB), Gestalt Arkitektur AB and architect Christian Kahlefeldt, Nola designed and presented a new outdoor office concept at Växjö Business Park I11.

Rosendal, Uppsala

Rosendal is a new residential area near Uppsala. Around 3,500 new homes are being built here, creating a community with a broad variety of contemporary Swedish architecture.

Torsgatan, Stockholm

A courtyard on Torsgatan, Stockholm, behind the Stockholm Vatten-building from 1906, has been designed with activity, recreation and social interactions in mind.

Torsgatan, Stockholm

A courtyard on Torsgatan, Stockholm, behind the Stockholm Vatten-building from 1906, has been designed with activity, recreation and social interactions in mind.

Se alla projekt
Designers

Thomas Bernstrand

Designer Thomas Bernstrand, who owns his own design studio in Stockholm, has participated in a large number of design and art exhibitions around the world such as MoMA in New York, Colette in Paris, Biennale Design Saint-Etienne and others.

Bernstrand has received several awards for his work, including Excellent Swedish Form and Winner of the Good Design Award 2012 for Nolastolen Share. For Nola, Bernstrand has designed a large number of products and furniture series and participated in a number of special projects over the years.

Similar products
close

Cookies are used to make this website work and to enhance your experience. To learn more about the types of cookies this website uses, see our Cookie Policy. You can provide consent by clicking the "I Consent" button or by canceling this cookie notice.

Close
Your cookie preferences have been saved